WINKEL GmbH 2018 | Catalogo prodotti | Product catalogue

Sistemi di componenti | Components systems WINKEL Cuscinetti | WINKEL Bearings

Pignone con denti fresati Dente diritto, dente fresato, angolo di pressione 20°, acciaio C45 (Materiale Nr. 1.0503) Dentatura qualità 9 e 25.

Pinion with milled teeth straight tooth system, milled teeth, 20° transverse pressure angle, steel C 45 (material code 1.0503). Gearing grade 9 e 25.

Pignone Modulo 2 pinion module 2

Pignone Modulo 3 pinion module 3

Pignone Modulo 4 pinion module 4

60

50

35

d 1

d 1

d k

d k

d N

d N

d 1

d k

d N

d

d

d

40

30

20

Pignone Modulo 5 pinion module 5

Pignone Modulo 6 pinion module 6

70

80

d 1

d k

d N

d 1

d k

d N

d

d

50

60

Tipo Type

Articolo Nr Article No.

Nr. denti z

d mm d K

mm d 1 mm d 1

mm d N mm d N

mm M1 max. Nm M2 max. Nm M3 max. Nm Peso kg mm M1 max. Nm M2 max. Nm M3 max. Nm Weight kg

No. of teeth z d mm d K

Mod. 2 218.502.020 Mod. 2 218.502.024 Mod. 2 218.502.030 Mod. 2 218.502.035 Mod. 3 218.503.015 Mod. 3 218.503.017 Mod. 3 218.503.023 Mod. 3 218.503.025 Mod. 4 218.504.017 Mod. 4 218.504.019 Mod. 4 218.504.023 Mod. 5 218.505.017 Mod. 5 218.505.021 Mod. 5 218.505.023 Mod. 6 218.506.021 Mod. 6 218.506.025

20 24 30 35 15 17 23 25 17 19 23 17 21 23 21 25

40,0 44,0 9,0 30,0 48,0 52,0 12,0 35,0 60,0 64,0 12,0 40,0 70,0 74,0 12,0 50,0 45,0 51,0 14,0 35,0 51,0 57,0 14,0 42,0 69,0 75,0 14,0 50,0 75,0 81,0 14,0 60,0 68,0 76,0 16,0 50,0 76,0 84,0 16,0 60,0 92,0 100,0 16,0 75,0 85,0 95,0 20,0 70,0 105,0 115,0 20,0 70,0 115,0 125,0 20,0 80,0 126,0 138,0 20,0 90,0 150,0 162,0 20,0 110,0

14 24 44 70

28 43 74

75

0,22 0,36 0,50 0,67 0,41 0,67 1,10 1,35 1,30 1,70 2,60

120 152 170

110

13 21 76 97

41 70

87

148 350 440 365 545 950

132 168 175 225 338 350 560 675

60

100 190 120 280 380 510 870

730

2,20 3,80 4,70

1370 1575 2450 2950

970

6,70 9,60

1400

M1 max. for rack and pinion not hardened M2 max. for rack not hardened and pinion hardened M3 max. for rack and pinion hardened Additional treatment (turning bores, keywaying, hardening …) on request.

M1 max per cremagliera e pignone non temprati M2 max per cremagliera non temprata e pignone temprato M3 max per cremagliera e pignone temprati Altre lavorazioni (tempra, fori di fissaggio etc) a richiesta

137